Do You Know The Next Step of PCBs Waste Treatment After Oil Draining Process? Part 3

After the oil draining process as described previously, the processing is continued with Segregation and Dismantling as well as through the Dechlorination & Oil Purification process. After the two processes are complete, the decontamination process is continued. How the process runs, we see the following.

Dismantling and Segregation

Dismantling and Segregation Empty transformers will be dismantled and segregated into several types of material such as metal casing, copper, iron, ceramics, or plastic/ paper. Dismantling process is conducted to separate the parts of the transformers according to its type. Metal casing will be cut to adjust and fit with the dimension of autoclave unit (preparation for the next step: decontamination process). Dismantling activities are carried out in a controlled area, where the air in that area will be passed on an activated carbon filter before going out into the environment. Workers for this process are wearing Personal Protective Equipment (PPE) which is comply with safety standard such as respirator, coverall, safety shoes, safety helmet, goggles, and gloves, in order to minimize the exposure to workers.

Dechlorination and Oil Purification

PCBs oil that has been drained from transformers in oil draning process will be processed in dechlorination unit. This process is carried out in closed system and vacuum condition. Dechlorination process is the removal of one or more chlorine atoms in PCBs molecule using alkali metal. The reagent used in this process is sodium metal (Na). Sodium metal will form ionic bond with chlorine atom and combine into NaCl salt. Furthermore, PCBs molecule will turn into simply biphenyl (non-chlorinated). The chemical reaction occured as follow: The dechlorination reaction process takes approximately 30-60 minutes and periodically sampling is carried out to determine the concentration of PCBs in the dechlorination tank. When the process is complete (the PCBs concentration has reached the set target), the oil is ready to be filtered. Bleaching earth is added before the oil enters the filtering unit. Oil free PCBs from the dechlorination tank, after the temperature is lowered then filtered using a filter press. The filtered oil free PCBs will be further processed in the oil purification unit. The filtered cake or sludge is processed by Stabilization before being stockpiled in landfills. b) Oil Purification Oil free PCBs from the dechlorination process after the filtering process are pumped into the purification unit to reduce the water content to 10-15 ppm and remove dissolved gases. After this series of processes is completed, the oil free PCBs have been purified and ready to be used again in the transformer and have met the transformer oil standard/ specification. Dechlorination Proccess Regeneration Proccess Sodium metal will be dissolved in PCBs oil (in small quantity) in reagent tank as a preparation step before being put into dechlorination tank. Reagent tank and dechlorination tank will be heated using diathermic oil boiler and maintained its temperature at 110 C. After that, sodium mixture will be pumped into dechlorination tank which containings PCBs oil and the reaction proceed. Dechlorination process is conducted in batch system.


Decontamination process is a process of residue removal (PCBs oil) on transformers including its component by using solvent vapor. This process is carried out in an autoclave unit under vacuum condition and closed system. Solvent that is used in decontamination process are PerChloroEthylene (PCE) or TriChloroEthylene (TCE). Solvent will be heated until its vapor phase and rinse the contaminant in material continuously. The solvent vapor then condensed using cooling system and recycled in distiller (under vacuum condition) and evaporated again, and decontamination process repeated. This cycle will continue until the expected PCBs concentration has been reached. So that the solvent will be re-used and still running in the system. If the decontamination target has been reached, the transformer/ material has already been decontaminated. Material is removed from the autoclave and “dried” in the drying area which is equipped with an activated carbon filter to ensure that no solvent vapor is released into the environment. The decontamination process workspace is also equipped with an activated carbon filter as a form of anticipation if there is solvent vapor released into the work environment. Metal material from decontaminationprocess can be recycled, and other material that can not be recycled will be processed and disposed in the landfill. atp

More Curious? Wait for the next graphic info

Scroll to Top